Anti Bump Steer Conversion Kit

Most cars built from chassis number 8001 onwards suffered in one way or another with various steering and suspension problems. The most common of these being chronic bump steer.

This in Laymen’s terms is a tendency to veer to the left or right on undulating road surfaces making the car unpleasant, if not dangerous to drive. Most Marcos owners will have experienced this.

In conjunction with Harvey Bailey Engineering, we have developed an easy to fit conversion to eliminate the bump steer, making the car safer and far more pleasant to drive.

This transformation is obtained by repositioning certain suspension pick up points and supplying modified steering components which can be easily fitted by any competent owner. There are brackets supplied which need to be welded to the chassis, this must be done by a competent professional welder.

Alternatively we can carry out the modifications for you.

The conversion comprises of all the brackets, new components, nuts, bolts, washers, full instructions and drawings where necessary.

Prior to dispatch of the conversion, we will need both suspension uprights and steering arms to enable us to carry out certain modifications. These will be returned with the other components. (Normally carried out within 48hrs)

For Live Axle cars, we will also supply modified radius rods, brackets, nuts, bolts etc…. This is to eliminate rear end steer inherent in these cars which in conjunction with the front end bump steer, can make certain cars very unpredictable and extremely unpleasant to drive.


Conversion for Live Axle Cars	£485.00 + VAT
Conversion for IRS Cars	£285.00 + VAT

Prices indicate supply only – does not include fitting.

M A R C O S H E R I T A G E

E n g i n e e r i n g w i t h E l e g a n c e

Marcos Heritage Ltd, Littleton Garage, Semington, Nr Trowbridge, Wiltshire, BA14 6LF

Tel: 01380 871717 Fax: 0 1380 870923 sales@rory.uk.com